BC Biomedical SA-2001 Manuale Utente

ELECTRICAL SAFETY ANALYZER SA-2001 SA-2001-INTL SA-2001-AUS USER MANUAL

2 AVAILABLE MODELS: SA-2001 – STANDARD MODEL WITH HOSPITAL-GRADE NEMA 5-15P LINE PLUG AND HOSPITAL-GRADE NEMA 5-20R DUT TEST RECEPTACLE FOR USE I

3 BC20-20200 REPLACEMENT SA-2001-INTL DUT INTERNATIONAL RECEPTACLE ADAPTER BC20-20221 SCHUKO GROUNDING ADAPTER BC20-41337 RS-232

4 This section looks at the layouts of the SA-2001 Models and gives descriptions of the elements that are present. For all models, the user contro

5 SA-2001-INTL Layout SA-2001-AUS Layout (SA-2001-INTL-R shown) The

6 Display The main information in the system is presented in the 3-1/2 digit LCD display. This data is provided as simple meter readings with the m

7 Connectors There are two connectors for test cables on the unit. One is for the Chassis lead and the other is for one of two different leads used

8 Communications (Optional) On Analyzer models with the –R option, a DB-9 RS-232 Communications p

9 The SA-2001 Models allow the user a great deal of flexibility in testing. Any of the basic tests can be run and in almost any sequence. The infor

10 Device Current With the Device Current function selected, the display will show the current draw of the DUT. The Receptacle should be configured

11 External Point to Point Measurements The unit has the ability to measure Leakage Current and Resistance between two points, utilizing

12 The communication protocol provides a means to completely configure and use the Analyzer from a PC or other device with RS-232 communications int

13 case characters in the command summary table below are used to show the shortened versions of the commands if available. SA-2001

14 Revision # Revisions Made Rev 01 Origination P:\MANUALS\BCGroup\…\SA2001_Series_UM_Rev01.docx

15 MAINS VOLTAGE RANGE 90 to 264 VAC, 50/60 Hz ACCURACY ± 3% of Reading, ± 1 digit DEVICE CURRENT RANGE 0 to 19.99 Amps, RMS ACCURACY ± 5% o

16 ELECTRICAL OPERATING LINE VOLTAGE 90 to 264 VAC, 50/60 Hz LINE PLUG SA-2001 MODELS NEMA 5-15P SA-2001-INTL MODELS Universal IEC C20 Receptacle Pig

17 ELECTRICAL (continued) DUT RECEPTACLE (continued) SA-2001-INTL MODELS o EU1-16P (EURO) CEE 7/7 “SCHUKO” (NOTE: MUST USE BC20-20221

18 NOTES

BC GROUP INTERNATIONAL, INC. 3081 ELM POINT INDUSTRIAL DRIVE ST. CHARLES, MO 63301 USA 1-800-242-8428 1-314-638-3800 www.bcgroupi

i WARNINGS, CAUTIONS, NOTICES ... ii DESCRIPTION ...

ii WARNING - USE The SA-2001 is intended for testing only and should never be used in diagnostics, trea

iii CAUTION - SERVICE The SA-2001 is intended to be serviced only by authorized service personnel. Troubleshooting and service procedures should

iv NOTICE – SYMBOLS Symbol Description Caution (Consult Manual for Further Information) Electrical Caution (Consult Manual for Further

v SA-2001 Series User Manual Copyright © 2012 www.bcgroupintl.com Made in the USA 08/12

vi This Page Intentionally Left Blank

1 The Model SA-2001 Series is a Microprocessor based Electrical Safety Analyzer. It allows for a multitude of tests to be performed on a de